PEMBUATAN DAN PENGEMBANGAN ALAT PENARIK KARET MOUNTING PADA SEPEDA MOTOR SEBAGAI MEDIA PEMBELAJARAN UNTUK MENINGKATKAN KOMPETENSI SISWA KELAS XI SMK MUHAMMADIYAH PETANAHAN
Abstract
This research aims to develop a motorcycle rubber mounting puller tool as a learning media to improve the competence of 11th-grade students at SMK Muhammadiyah Petanahan in the disassembly and assembly process of the motorcycle engineering department. This research uses the Research and Development (R&D) method with the 4-D (Four-D) development model from Thiagarajan, which consists of four stages: Define, Design, Develop, and Disseminate. The subjects of the trial were 10 students of class XI and one motorcycle engineering teacher at SMK Muhammadiyah Petanahan. The research instruments used were material expert validation sheets, media expert validation sheets, teacher response questionnaires, and student response questionnaires. Based on the results of the material expert validation and media expert validation, it shows that the motorcycle rubber mounting puller tool is very feasible with a percentage of 90%. The results of the student responses in the field trial obtained an average percentage of 93%. The teacher's response to the development of the rubber mounting puller tool obtained a percentage of 93.3%. With the percentage obtained, it is included in the very feasible category. In addition, from the trial results, it was also found that students stated that this tool is practical to use, supported by a simple design. This shows that the developed tool is feasible and can be used for the teaching and learning process in schools.
References
Ahmad Rival. (2024). Pembuatan panel peraga rangkaian kelistrikan lampu tanda belok kendaraan ringan sebagai media pembelajaran siswa kelas XI SMK Negeri 7 Lhoksemawe. Skripsi.
Arsyad, A. (2019). Media pembelajaran. Jakarta: Rajawali Pers.
Daryanto. (2016). Media pembelajaran peranannya sangat penting dalam mencapai tujuan pembelajaran. Yogyakarta: Gava Media.
Finch, C. R., & Crunkilton, J. R. (1999). Curriculum development in vocational and technical education: Planning, content, and implementation. Boston: Allyn and Bacon.
Health and Safety Executive. (2009). Safe use of work equipment. London: HSE Books.
Hendrawan, A. (2020). Special service tools dalam perawatan kendaraan. Bandung: Alfabeta.
Hernandez, R. (2021). Automotive special service tools and their applications. New York: Springer.
Hofstein, A., & Lunetta, V. N. (2004). The laboratory in science education: Foundations for the twenty-first century. Science Education, 88(1), 28-54.
IISTE News. (2024). Advanced tools in local workshop repair and maintenance. IISTE Journal of Engineering, 12(3), 45-58.
Juntoro, E. (2025). Penggunaan special service tools dalam pembelajaran otomotif. Jurnal Pendidikan Vokasi, 15(1), 78-89.
Kolb, D. A. (1984). Experiential learning: Experience as the source of learning and development. Englewood Cliffs, NJ: Prentice-Hall.
Kumparan. (2024). Fungsi karet mounting pada motor matic. Kumparan Otomotif. Retrieved from https://kumparan.com.
Muslim, M. (2021). Media pembelajaran berbasis alat nyata dalam pendidikan kejuruan. Jurnal Teknologi Pendidikan, 23(2), 112-125.
Novita, L., et al. (2020). Media pembelajaran dan penggunaannya. Jurnal Inovasi Pendidikan, 10(2), 89-102.
Otorider. (2022). Penyebab dan gejala karet mounting motor matic rusak. Otorider Indonesia.
Peraturan Pemerintah Nomor 19 Tahun 2005 tentang Standar Nasional Pendidikan.
Permendikbud Nomor 34 Tahun 2018 tentang Standar Nasional Pendidikan SMK.
Prasetyo, A. (2019). Peran SST dalam pembelajaran praktik otomotif. Jurnal Pendidikan Teknik Mesin, 12(1), 45-56.
Primartadi, A., Suyitno, S., & Jatmoko, D. (2024). Pengembangan media pembelajaran sistem rem cakram dan tromol sepeda motor terhadap minat belajar siswa SMK. Jurnal Didaktik, 10(1), 78-92.
RPM Rubber Parts. (2024). Understanding motorcycle mounting rubber. RPM Technical Bulletin.
Sudira, P. (2016). Vokasi abad 21: Filosofi, teori, konsep, dan strategi pembelajaran vokasional. Yogyakarta: UNY Press.
Sugiyono. (2010). Metode penelitian pendidikan pendekatan kuantitatif, kualitatif, dan R&D. Bandung: Alfabeta.
Suharsimi Arikunto. (2013). Prosedur penelitian suatu pendekatan praktik. Jakarta: Rineka Cipta.
Suyitno, S., Widianto, I., & Masrul, S. (2018). Pengembangan media pembelajaran mata kuliah motor bensin dua langkah untuk meningkatkan hasil belajar siswa. Jurnal Pendidikan Vokasi, 8(2), 156-169.
Suzuki Indonesia. (2025). Panduan perawatan komponen mesin motor matic. Suzuki Teknis.
Thiagarajan, S., Semmel, D. S., & Semmel, M. I. (1974). Instructional development for training teachers of exceptional children: A sourcebook. Bloomington: Center for Innovation in Teaching the Handicapped.
Toyota Motor Corporation. (2018). Special service tools catalogue. Tokyo: Toyota.
Undang-Undang Nomor 20 Tahun 2003 tentang Sistem Pendidikan Nasional
