ANALISA PENTINGNYA PERAWATAN INJEKTOR DALAM RANGKA PENINGKATAN KINERJA GENERATOR DI KAPAL GAS AURORA
Abstract
This study was conducted to examine the factors that cause injector leaks and their impact on the performance of generators powered by Yanmar S165L 6-cylinder auxiliary engines on the Gas Aurora vessel. The research approach used was a descriptive qualitative and ex post facto method, with information collected through field observations, engine operating parameter measurements, injector physical condition inspections, testing using test bench equipment, and interviews with engine personnel. The research findings indicate that injector leaks are triggered by a combination of mechanical, operational, and maintenance factors. The dominant triggers include nozzle and needle wear, sealing component failure, and carbon deposits due to prolonged low-load engine operation. Furthermore, the suboptimal implementation of the Planned Maintenance System (PMS) increases the risk of these problems. This situation results in an exhaust gas temperature (EGT) difference between cylinders of 20–40°C, increased fuel consumption, the appearance of exhaust smoke, and reduced generator performance stability during operation.
References
Cullinane, K. (2020). International handbook of maritime economics. Routledge.
Denso Corporation. (2023). Overview of precision components in modern fuel injectors. Denso Technical Bulletin.
Kegl, B., & Kegl, M. (2020). Fuel spray, combustion, and emission formation in marine diesel engines. Energy Conversion and Management, 203, 112–245.
Kegl, B., et al. (2020). Fuel injector influence on combustion and emissions in diesel engines. Energies, 13(10), 2479. https://www.mdpi.com/1996-1073/13/10/2479/pdf
Ma, Y., Wang, X., & Zhang, L. (2019). Failure mechanisms of diesel injector nozzles under long-term operation. Journal of Marine Science and Engineering, 7(6), 180.
Martínez-Martínez, S., et al. (2021). Hydraulic interactions between injection events using multiple injection strategies in common-rail diesel systems. Energies, 14(11), 3087. https://www.mdpi.com/1996-1073/14/11/3087/pdf
MDPI. (2025). The impact of the common rail fuel injection system on performance and emissions. https://www.mdpi.com/1996-1073/18/19/5259
Payri, R., Viera, G., & Martí-Aldaraví, P. (2022). Experimental analysis of injector energizing time and needle dynamics in high-pressure diesel injection systems. Energies, 15(9), 3305. https://www.mdpi.com/1996-1073/15/9/3305/pdf
Qiao, S., Yue, D., & Li, J. (2025). Energy consumption optimization for ship diesel engines: A big-data-driven approach. Frontiers in Marine Science, 12, 1551192. https://www.frontiersin.org/journals/marine-science/articles/10.3389/fmars.2025.1551192/pdf
Scania. (2023). Injector operation cycle and phases in modern diesel engines. Scania Technical Publications.
Sugiyono. (2018). Metode penelitian kualitatif, kuantitatif, dan R&D. Alfabeta. https://alfabeta.co.id/
Yuan, W., Zhang, Y., Fang, J., & Wang, T. (2021). Investigation of needle closing dynamics and cavitation effects in diesel injectors. Fuel Communications, 7, 100046. https://www.sciencedirect.com/science/article/pii/S2666386421000465
Zhang, Q., Li, H., Sun, Z., & Chen, X. (2023). Effects of needle lift and injection pressure on diesel spray morphology in modern common-rail systems. Energies, 16(4), 1663. https://www.mdpi.com/1996-1073/16/4/1663/pdf











